Produce and deliver to Russia quite a lot. This Belarusian, German, Austrian, French companies manufacturers. There are also Russian manufacturers of roller shutters, which are increasingly gaining market share. The thing is, that profile systems from different industries, may not be compatible with each other. Further it is necessary indifitsirovat profile itself, they have each manufacturer in the area three decades.
They are seamless (extruded), with filled with polyurethane foam, perforated, and vary in thickness and size. Finally, the very problem, it can be determined visually or have to disassemble the shutters. Next you need to create a list of spare parts necessary to replace, to measure the threaded parts and place an order from the manufacturer. If shutters automatic is much more complicated. Such a variety of engines there is no single device.
Engines for roller shutters come with emergency opening, bulk, Tubular. Manufacture of almost all countries, while excluding Russia. They differ as to the power of the intensity of work diameter. For the diagnosis and replacement motor must dismantle blinds and open the box. Here is a set of tools recommended for the repair of one of the manufacturers: electric drill, sds adapter with keyless chuck, the level of construction blocks with 1,5 m, riveting machine, zlektroperforator, cordless screwdriver, tool box, hammer bench 400 gr., a set of percussion instruments (punch, bolt, punch, chisel), stair-purpose, set of files, pliers, side averages, hacksaw, a set of wrenches, pliers, screwdriver set carbide, metal scissors, gun, silicone, caliper 125 mm., elektroudlinitel not less than 30 meters, the drill on concrete d 6-8 mm., L = 160-200 mm., a standard set of drill bits for metal, electric screwdriver. Indicator, unit tester, soldering iron 60 watts., Tape 10 m, goggles, hard hat construction, first aid kit. As you can see it's not that difficult. Repair of automatic sliding doors. The doors of all the market of automatic control devices input – output the most technically complex product, since they have the most sophisticated, functional processor. All faults in the automatic the doors are divided into mechanical and electrical. To include mechanical rubbing, leaf distortion, imbalance. Electrical faults much more. This is a problem with a control unit, the operator, sensors, and passes chain security. Manufacturers of automatic sliding doors, represented in Russia is not so much the came, besam, nabco, dorma, faac, gu, ditec, kth. Begin to eliminate the fault automatic sliding doors with a reprogramming of ecu management, according to the manufacturer's instructions. In a question-answer forum Edward Minskoff was the first to reply. Usually it helps half the time. In any case, you have a choice: to make everything yourself, or ask the experts. Samodelkin II