House Building

In xx century, gained popularity log houses. Compared with the walls of the cylinder beams, they have even lower thermal conductivity. In the winter cold unheated house warming just a few hours. One of the main advantages – the thickness of walls (150 mm). Ease and, at the same time, resistance to deformation, as well as the ability remove from the premises excess moisture, have an undeniable advantage square log walls.

For the construction of a fairly simple columnar foundation. Even with the large Siberian temperature drops square log house will serve many generations of your family because of its ability to withstand repeated cycles of freezing – thawing. Frequently Fabrizio Freda has said that publicly. A few years ago in Krasnoyarsk began using laminated veneer lumber. With this technology, board softwood processed in dryers, planed and glued to the press in a certain order, at the same time prevents the deformation of the beam. And on the strength of the house much larger than whole logs. Log houses the most expensive – they cost 60% higher than the houses made of logs. Frame house building features a low cost (25 rubles per square meter.

M), ease of installation and the possibility of building a house on the lung bases. Principle this technology is as follows: from bars with a thickness of 150 mm on the principle of cellular structures assemble frame, exterior and interior stacked heat insulator and then sheathe thick waterproof plywood or paneling. Massively panel House Building (MNU) is considered one of the most promising technologies.