The development of technology today is impossible without reliable and simple systems and control mechanisms that can operate for a long time with minimal human intervention. One of these systems are hydroelectric. Industrial Hydraulic widely used in cnc machines, hydraulic presses, road machinery, logging equipment As the 'heart' hose, industrial Hydraulic require proper operation, timely, routine maintenance and, of course, high-quality sites. Hydrostation drawn from the tank, pump, dc motor and special hydraulic elements. Reservoir is a carrier design for all elements. In hydro embed special hydraulic valve parts such as taper functional surfaces, which provide high integrity. When choosing hydrostation should carefully study the diagrams and technical data pump, motor and reservoir.
The main characteristics of the stations, oil stations and pumping systems include: Pressure, MPa Bar, kgf (1 MPa = 10bar = 10.19 kgf/cm2). The pressure of working fluid – oil, which is necessary to create the system capacity, l / min. Oil tank capacity, l. Number of drainage lines. Ie, the amount alleged by the customer executive bodies (such as hydraulic cylinders or hydraulic) press machine, machine, machines, etc. Do I need to install the control valve (-ate).
The customer must know the additional requirements (if any) to the station, or additional equipment installed on the power station, oil station or pump installation or have gidroshemu or description of the power station. Standard, equipped with hydro: Pump plate or axial piston, depending on the required pressure. ac electric motor air. If necessary, hydro can be fitted with explosion-proof motor, or any other optional customer. Tank. Standard Oil tank capacity of 10, 25, 40, 63, 100, 160, 250, 400 liters. Tank is equipped with a tap oil drain, manholes for cleaning. Oil tank capacity is dependent on the amount of executive bodies of the hydraulic system. For example, if workers serves as a hydraulic cylinder body, then you need to know its inner diameter and stroke. The water inlet filter strainer. To clean the oil from the impurities in the casting. Safety automatic valve. Serves to control